This is my first fixed wing 3D printed drone project. I used regular PLA from Kingroon out of simplicity and I used a 238 g 4S battery.. Hence it turned out to be quite heavy at about 1100 g. I implemented a switch at the bottom to conveniently turn the power on when I get to fly it. The key features are:
- Wingspan: 66 cm
- Length: 60 cm
- Fuselage width: 6 cm
- Wing: NACA 2412
- Chord: 15 cm
- Wing Servos: SG90
- Tail servos: Neebr 2G
Your can download the stl files here:
Download stl